Table of Contents
Advertisement
F
itting the furniture door to the appliance
If
you need the appliance door to open from the other
side, then please reverse the door before commencing the
installation process. (See "Reversing the door section").
Tools required:-
o Tape measure
o Sharp pencil
o Small flat blad
o Spanner
IMPORTANT: We recommend that two people install this appliance.
a
) Undo the screws from the two adjusting bolts that are located on
the top of the appliance door and then remove the mounting bracket
(1).
b
) Measure the width of the furniture door, at the halfway point mark a
line vertically down the inner surface of the furniture door. You should
draw the line from the top of the furniture door to approximately
halfway down.
ed screwdriver
23
Advertisement
Table of Contents
