Table of Contents
Advertisement
Adjusting the plinth/kickboard
When the appliance has been fitted, you may decide to attach a plinth
or kickboard to match your existing kitchen units.
o Remove the grid on the base of the fridge by releasing the
fastenings just inside of the grill on each side. Then pull the grid
towards you.
o Insert the plinth/kickboard and then refit the grid in its original
position to hold it in place.
Reversing the door of your appliance
This procedure MUST be completed before the furniture
door is attached.
Any parts that you remove from the appliance whilst
reversing the door, should be retained for later use.
WARNING- Take care when opening the hinges, they
are sprung loaded and there is the risk of injury if
they close on your hand.
Tools required:-
o Phillips screwdriver
o Flat bladed screwdriver
o Socket set
1) Remove the blanking plates from
the outside of the appliance door.
24
Advertisement
Table of Contents
