Table of Contents
Advertisement
Using your Baumatic larder fridge
Before switching on
o Make sure that it has been installed by a suitably qualified person,
as
per
the
information
instructions.
o After delivery, wait for eight hours before connecting the appliance
to your mains supply. This will allow any refrigerant gasses that
may have been disturbed during the transportation process to
settle.
o The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
o The interior of the appliance should be cleaned with
a
solution
of
lukewarm water. The interior and accessories should
be thoroughly dried, after the cleaning process has
been completed.
o There can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.
During first use
o You should set the thermostat dial to its maximum setting for 24
hours after switching on the appliance for the first time.
o When you first switch on the appliance, the compressor will run
continuously for approximately 24 hours or until the fridge freezer
reaches a cool enough temperature.
o During this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
o You should then adjust the thermostat dial down to its normal
operating position.
o If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance on the thermostat or
connecting it to your mains supply.
contained
sodium
bicarbonate
in
Baumatic's
installation
dissolved
in
10
Advertisement
Table of Contents
