Mitsubishi Electric TX20U User Manual page 63

Advanced features (continued)
7. Press the ENTER button.
• To cancel the procedure, press the MENU button.
8. Enter the password again for confirmation using the
same steps.
9. Press the ENTER button.
• If the entered passwords don't match, an error
message will appear.
• To cancel the procedure, press the MENU button.
To cancel the password function:
1. Display the FEATURE menu.
2. Press the or
FUNCTION.
3. Press the ENTER button.
• The screen for canceling the password function
will appear.
4. Press the ENTER button.
• The screen for entering the password will appear.
5. Enter a 4 - 8 digit password using the
buttons.
( =1, =2, =3,
6. Press the ENTER button.
• If you enter a wrong password, an error message
will appear.
• To cancel the procedure, press the MENU button.
Important:
• You can disable the password by pressing the
MENU and ENTER buttons on the projector at the
same time for about 3 seconds.
button to select PASSWORD
,
=4)
Magnifying the displayed image
By pressing the MAGNIFY button on the remote
control, you can magnify the image to view the details.
• While viewing the image from the COMPUTER1,
COMPUTER2, HDMI1, HDMI2, LAN DISPLAY, USB
DISPALY or USB VIEWER input source, you can
magnify the image.
To use the MAGNIFY mode:
1. Press the MAGNIFY button on the remote control.
• You can select the area to be magnified by
pressing the
control.
• You can change the magnification of the selected
area by pressing the + or - button.
2. Press the MAGNIFY button again to exit the
MAGNIFY mode.
• The regular operation screen will appear.
Important:
• The MAGNIFY mode doesn't function with some
input signals.
• In the MAGNIFY mode, you cannot perform the
following:
, and
• Volume control
• Viewing 3D images
EN-63
Magnified image
, , or button on the remote