Mitsubishi Electric TX20U User Manual page 47

Advanced display utilities (continued)
Operation
Starting USB Display projection
1. Press the SOURCE button and select USB DISPLAY.
• When the USB Display input is selected, the
splash screen for USB Display appears on the
screen.
2. When the computer is connected to the projector,
the computer image is automatically displayed on
the screen.
Ending USB Display projection
When using Windows XP, Windows Vista, or
Windows 7
3. Unplug the USB cable from the projector.
• It is not necessary to "Safely Remove Hardware"
on the computer or to press the UNPLUG button
on the remote control.
When using Mac OS X
4. On the computer, open the Finder and click "
the right of [USB_DISPLAY] to unmount the
projector.
5. Unplug the USB cable from the projector.
Important:
• When the image is projected, the computer
resolution will be changed according to the projector
model and will be automatically recovered after
unplugging the USB cable.
LAN Display
You can project the computer images inputted via a
wired or wireless LAN.
You can also perform the following during the LAN
Display projection:
• 4-to-1 split screen projection
Images from up to 4 computers can be projected
split on 1 projector screen.
• Remote desktop
Connecting an input device such as a mouse or
keyboard to the USB-A terminal on the projector
enables the following computer operations from the
projector.
• Showing local files of the computer
• Operating the application software
• Showing server files on the network
• Browsing of the internet
• SidePad
Computer images are transferred to the tablet
computer and you can operate the computer from
the tablet computer.
To use the LAN Display function, you need to install the
software "LAN Display System" contained in the
attached CD-ROM.
Supported OS's are as follows:
" on
• Windows XP
• Windows Vista
• Windows 7
• Mac OS X 10.5 or later
Important:
• Mac computers based on the PowerPC processors
are not supported.
• Remote desktop cannot be performed during 4-to-1
split screen projection.
Installation of software
Installing LAN Display System
Before starting installation, be sure to read
"ReadMe.txt" contained in the CD-ROM.
When using Windows XP, Windows Vista, or
Windows 7
1. Copy "LAN Display System_v300.exe" contained in
the TOOLS folder of CD-ROM to the hard disk of
your computer.
2. Double-click "LAN Display System_v300.exe" on the
hard disk, and start up the installer of the LAN
Display System.
3. Follow the on-screen instructions to install the
software.
• When the installation has been completed, LAN
Display System is automatically executed.
EN-47