Mitsubishi Electric XD205U User Manual
Hide thumbs
Also See for XD205U:
- User manual (30 pages) ,
- Specification sheet (2 pages) ,
- User manual (30 pages)
Related Manuals for Mitsubishi Electric XD205U
Summary of Contents for Mitsubishi Electric XD205U
- Page 1 DATA PROJECTOR MODEL XD205U SD205U User Manual XD205 SD205 This User Manual is important to you. Please read it before using your projector.
- Page 2 Never use them for other products. Please follow WARNING instructions. Note: This symbol mark is for Your MITSUBISHI ELECTRIC product is designed and manufactured with high EU countries only. quality materials and components which can be recycled and reused.
-
Page 3: Table Of Contents
Advanced feature..........................20 Lamp replacement..........................22 Troubleshooting ..........................23 Indicators ............................26 Specifications ...........................27 Declaration of Conformity Model Number : XD205U/SD205U Trade Name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road, Irvine, CA 92618 U.S.A Telephone number : +1-(949) 465-6000 This device complies with Part 15 of the FCC Rules. -
Page 4: Important Safeguards
Important safeguards Please read all these instructions regarding your projector and 11. Power-cord protection retain them for future reference. Follow all warnings and Power-supply cords should be routed so that they are not instructions marked on the projector. likely to be walked on or pinched by items placed upon or against them. - Page 5 WARNING: Do not touch the air outlet grilles and bottom plate. Do not touch them or put other equipment close to the air out- Unplug immediately if there is something wrong let grilles because they become hot during operation. The with your projector.
-
Page 6: Overview
Overview 1 FOCUS ring 2 ZOOM ring 3 Control panel 4 Air outlet grille 5 Remote control sensor (Front) 6 Air inlet grille 7 Air inlet grille 8 Terminal board 9 Kensington Security Lock Standard connector 10 Air inlet grille 11 Speaker Control panel 1 Power button... -
Page 7: Bottom Side
Bottom side 1 Lamp cover 2 Adjustment feet Caution: Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns. Remote control 1 ON button 2 STILL button 3 AUTO POSITION button POWER OFF 4 ENTER button 5 MENU button... -
Page 8: Remote Control
Remote control Battery installation Use two AAA size batteries. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). •... -
Page 9: Installation
Image size varies depending on the distance between the screen and the projector. Front projection L : Between the screen and the front edge of the projector Hd : Height of the projected image XD205U/SD205U Screen Distance from the screen : L MINIMUM... -
Page 10: Basic Connections
Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. Important: • Make sure that the connected device is turned off before starting connection. •... - Page 11 Projector + Computer For computer with Mini D-SUB RGB cable for PC COMPUTER IN Computer to monitor AUDIO OUT AUDIO IN port AUDIO OUT Audio cable (option) MONITOR OUTPUT MONITOR OUT Necessary when outputting to both RGB cable for PC (option) a PC monitor and the projector.
-
Page 12: Preparation
Preparation Preparation for projection Tilt up the project to the appropriate angle. Press the foot adjustment buttons next to the adjustment Attach the provided power cord to the projector. feet (rear), and the adjustment feet will come out. Plug the power cord in the wall outlet. Release the buttons to lock the adjustment feet (rear) to Remove the lens cap. -
Page 13: Basic Operation
Basic operation POWER OFF STILL MUTE PAGE AUTO POSITION DOWN ENTER 16:9 MENU COMPUTER VIDEO 3, 1, KEYSTONE VOLUME Power-on • Images may not be projected with good quality in an extremely hot or cold environment. (This is not a product Turn on the device connected to the projector first. - Page 14 Basic operation (continued) Power-off Volume from the speaker Use the following procedure to turn off the projector. Do not Press the VOLUME + or -button to change the volume turn off the projector by unplugging the power cord while the from the speaker.
-
Page 15: Menu Operation
Menu operation IMAGE CONTRAST ±30 BRIGHTNESS ±30 WHITE ENHANCE AUTO, 0 - 10 COLOR TEMP . STANDARD CONTRAST R ±30 CONTRAST B ±30 HIGH BRIGHTNESS R ±30 USER BRIGHTNESS B ±30 COLOR ±10 TINT ±10 SHARPNESS ±5 GAMMA MODE AUTO, DYNAMIC, ST ANDARD, THEATER INSTALLATION AUTO POWER ON ON , OFF... - Page 16 Menu operation (continued) 1 IMAGE CONTRAST.........Use to adjust the image contrast. The contrast opt. XGA60 becomes higher as the value increases. BRIGHTNESS ......Use to adjust the image brightness. The image IMAGE becomes brighter as the value increases. CONTRAST WHITE ENHANCE ......Use to adjust the white level of the projected image. BRIGHTNESS Select AUTO for normal use.
- Page 17 3 FEATURE MENU POSITION ....... Use to select the position of the menu on the screen, opt. XGA60 (upper left) or 2. (lower right). CINEMA MOD......When AUTO is selected, the film mode will be auto- FEATURE matically activated when a film source signal is input- MENU POSITION ted.
-
Page 18: Image Adjustment
Image adjustment Image adjustment Color temperature You can adjust the image using the IMAGE menu. Select COLOR TEMP. in the IMAGE menu. Press the button to select USER opt. XGA60 Press the ENTER button. IMAGE USER CONTRAST CONTRAST R BRIGHTNESS CONTRAST B WHITE ENHANCE AUTO... -
Page 19: Adjustment Of The Image From The Computer
Adjustment of the image from the computer Simple adjustment method This projector adjusts the format of the video signal supplied Select HORIZ. POSITION in the SIGNAL menu. from the computer. However, sometimes images are not pro- Press the button to adjust the horizontal start posi- jected correctly owing to the type of the computer used. -
Page 20: Advanced Feature
Advanced feature Still To stop the motion in the image temporarily (or to display a still image): Press the STILL button on the remote control. • The image will freeze temporarily. To resume the motion in the image: Press the STILL button on the remote control again. Important: •... -
Page 21: Password Function
Password function To cancel the password function: This projector is equipped with the password function that is Display the FEATURE menu. designed for prevention of wrong operation by children and Press the button to select PASSWORD FUNC- restriction on operation by other than specified users. TION. -
Page 22: Lamp Replacement
• Do not spill liquid on the replaced and the lamp operation time is reset. removed lamp box or do not XD205U/SD205U place it near any flammable object or where children can 2250 Hours reach to prevent injury or fire. -
Page 23: Troubleshooting
Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer. Images aren’t projected on the screen. Problem Cause and solution • Check the states of the indicators. POWER STATUS Solution... -
Page 24: Images Aren't Projected Correctly
Troubleshooting (continued) Images aren’t projected correctly. Problem Cause and solution • Check that the cable connected to the external device isn’t intermittent. • Connect the cable’s plug with the external device’s connector firmly. Projected images are shaking. • Press the AUTO POSITION button. Projected images are displaced. - Page 25 Others Problem Cause and solution • This air comes out as a result of cooling the inside of the projector. This isn’t a product malfunc- Hot air is emitted from the air outlet grilles. tion. No audio is output. • Check that the volume isn’t set to low.
-
Page 26: Indicators
Indicators This projector has two indicators, each of which shows the operation condition of the projector. The following offer solutions to possible problems. If these problem persist, turn the projector off and consult your dealer. STATUS indicator POWER indicator Normal condition POWER STATUS CONDITION... -
Page 27: Specifications
Light source lamp 205 W (XD205U/SD205U) Picture size 40 - 300 inch (aspect ratio 4:3) Resolution:640x400 (Expand) - 1024x768 (Real) - 1280x1024 (Compress) (XD205U) PC compatibility Resolution:640x400 (Expand) - 800x600 (Real) - 1024x768 (Compress) (SD205U) Sync on Green available NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60... - Page 28 246D036-10 (UK only) 1 Safety manual 871D472-10 1 RGB cable for PC 246D037-10 1 CD-ROM 919D273-10 1 VIDEO cable 246D039-10 1 Carrying case 772P046-10 2 Battery Replacement part (Option / Not included in the box) Spare lamp (for XD205U/SD205U) 499B045-20 (VLT-XD205LP) EN-28...
- Page 29 Specification of RGB signals in each computer mode of the projector resolution horizontal vertical XD205U SD205U Signal mode (H x V) frequency (kHz) frequency (Hz) (H x V) (H x V) TV60, 480i(525i) 15.73 59.94 1024 x 768 800 x 600 TV50, 576i(625i) 15.63...
- Page 30 :+44 (870) 606 5008 Technical Phone :+64-(0)4-560-9100 :+44 (1506) 431927 :+64-(0)4-560-9133 E-mail :projector.info@meuk.mee.com Russia (Mitsubishi Electric Europe B.V Moscow Representative Office) 52, bldg.5, Kosmodamianskaya Nab, 113054, Moscow, Russian Federation Sales Phone :+7 (095) 721 2070 :+7 (095) 721 2071 Technical Phone...