Mitsubishi Electric TX20U User Manual page 12

Installation (continued)
When entire projected image isn't
displayed within the screen
(DIGITAL ZOOM)
To adjust the projected image size and position, use
DIGITAL ZOOM function.
1. Press the DIGITAL ZOOM button.
• The DIGITAL ZOOM menu appears at the center
of the screen.
2. Press the + or - button to adjust the projected image
size.
• Every time the + button is pressed, the projected
image becomes larger.
• Every time the - button is pressed, the projected
image becomes smaller.
• Projected image is a maximum as factory default
(0).
Original image size
(= maximum image size)
3. Press the ENTER button.
• The SHIFT menu appears at the center of the
screen.
ENTER: DIGITAL ZOOM
4. Press the , , or
image position.
• Every time the
image moves up.
• Every time the
image moves down.
• Every time the
image moves to the left.
• Every time the
image moves to the right.
DIGITAL ZOOM
10
ENTER: SHIFT
Reduced image
DIGITAL ZOOM
10
ENTER: SHIFT
SHIFT
button to move the projected
button is pressed, the projected
button is pressed, the projected
button is pressed, the projected
button is pressed, the projected
Important:
• When you reduce the projected image using the
DIGITAL ZOOM function, the resolution decreases.
In addition, stripes may appear or straight lines may
bend in images with complicated patterns.
• When you use DIGITAL ZOOM and KEYSTONE in
combination,
narrower than that when these functions are used
individually.
Changing the AUTO POWER OFF
setting
The AUTO POWER OFF function of this projector is
enabled by default.
Change the AUTO POWER OFF setting as necessary.
(See page 28.)
To change the AUTO POWER OFF setting:
(See page 25 for menu setting.)
1. Display the INSTALLATION menu.
2. Select AUTO POWER OFF by pressing the
button.
3. Select your desired item by pressing the
button.
Important:
• This function does not work when the input source is
LAN DISPLAY, USB DISPLAY or USB VIEWER.
• The AUTO POWER OFF function does not work
during AV MUTE.
Setting IMAGE REVERSE
Set IMAGE REVERSE in the INSTALLATION menu
according to the orientation of the projector. The default
setting is OFF.
• Select OFF for the combination of floor installation
and front projection.
• Select MIRROR INVERT for the combination of
ceiling installation and front projection.
• Select MIRROR for the combination of floor
installation and rear projection.
• Select INVERT for the combination of ceiling
installation and rear projection.
(See page 25 for menu setting.)
1. Display the INSTALLATION menu.
EN-12
Adjustable in any
of four directions
SHIFT
ENTER: DIGITAL ZOOM
the adjustable range becomes
or
or