Mitsubishi Electric TX20U User Manual page 48

Advanced display utilities (continued)
When using Mac OS X
1. Copy "LAN Display System_v300.dmg" contained in
the TOOLS folder of CD-ROM to the hard disk of
your computer.
2. Double-click "LAN Display System_v300.dmg" on
the hard disk.
• The volume is mounted.
3. Drag and drop
"SidePadLite" into the [Applications] folder.
When deleting LAN Display System (Uninstallation)
Important:
• When uninstalling LAN Display System, it should be
ended in advance. If the application continues
operating, uninstallation cannot be performed
normally.
When using Windows XP, Windows Vista, or
Windows 7
1. Select [Start]-[All Programs]-[LAN Display System]-
[Uninstall].
2. Follow the on-screen instructions to uninstall the
software.
When using Mac OS X
1. Open the [Applications] folder.
2. Drag and drop
"SidePadLite" to the trash.
"LAN Display System"
"LAN Display System"
Connection
Connect the projector and the computer either by using
a commercially available LAN cable or USB wireless
LAN adapter.
and
Important:
• For wired LAN connection, use a category-5 LAN
cable. Both straight-through and crossover cables
can be used.
• The USB-A terminal on this projector is compatible
with USB 2.0.
• When using a USB hub, you are recommended to
use the one with external power supply.
• Some USB hubs cannot be used depending on the
and
specifications.
• Some USB wireless LAN adapters cannot be used
depending on the specifications.
• IP address, subnet mask, default gateway values are
the same for both wired LAN and wireless LAN.
• Data are not filtered between wired LAN and
wireless LAN interface.
Projection
Selecting a LAN Display input
1. Press the SOURCE button and select LAN DISPLAY.
• When the LAN Display input is selected, the
splash screen for LAN Display appears on the
screen.
EN-48
Computer
LAN cable
(option)
Computer
USB wireless
LAN adapter
(option)
To LAN
terminal
To USB-A
terminal