Mitsubishi Electric TX20U User Manual page 32

Menu operation (continued)
NETWORK menu
ITEM SETTING
PROJECTOR NAME *****...
NETWORK
ON
CERTIFICATION
NETWORK
ENTER
PASSWORD
IP CONFIG
ENTER
DHCP ON
OFF
IP ADDRESS
***.***.***.***
SUBNET MASK
***.***.***.***
DEFAULT
***.***.***.***
GATEWAY
MAC ADDRESS xx-xx-xx-xx-xx-xx
DHCP ON / OFF
FUNCTION
START IP
***.***.***.***
ADDRESS
END IP
***.***.***.***
ADDRESS
SAVE SETTINGS OK
WIRELESS
ENTER
SETTING
SSID
********...
CHANNEL AUTO / 1 / 2 / 3 / 4 / 5 / 6 / 7 /
8 / 9 / 10 / 11
ENCRYPTION
OFF
WEP 128bit(ASCII)
WEP 64bit(ASCII)
WEP 128bit(HEX)
WEP 64bit(HEX)
WPA-PSK(ASCII)
WPA2-PSK(ASCII)
WPA-PSK(HEX)
WPA2-PSK(HEX)
SAVE SETTINGS OK
FUNCTION
Set the name to identify the projector. Enter up to 15 characters (alphabets
or numeric characters). (See page 40.)
Select whether to enable the network certification or not. Select ON for
/ OFF
normal use. (See page 40.)
Set the password for the certification of PJLink™, ProjectorView Global+
and remote control via LAN. (See page 40.)
Select this setting for IP configuration. (See page 43.)
Select this setting when you obtain IP CONFIG automatically by DHCP
server.
Select this setting when you set IP CONFIG manually.
Press the ENTER button to set IP ADDRESS. When DHCP is set to ON, you
cannot change this setting
Press the ENTER button to set SUBNET MASK. When DHCP is set to ON,
you cannot change this setting.
Press the ENTER button to set DEFAULT GATEWAY. When DHCP is set to
ON, you cannot change this setting.
Displays MAC ADDRESS.
Use this setting when using the projector as a DHCP server.
Press the ENTER button to set START IP ADDRESS. When DHCP is set to
ON or DHCP FUNCTION is set to OFF, you cannot change this setting.
Press the ENTER button to set END IP ADDRESS. When DHCP is set to ON
or DHCP FUNCTION is set to OFF, you cannot change this setting.
Saves the IP CONFIG settings. When the IP CONFIG is not changed, you
cannot select SAVE SETTINGS.
Select this setting for wireless configuration. (See page 45.)
Set SSID. Enter up to 32 character alphabets (capital/small), numeric
characters, or marks.
Select the wireless channel.
Select the wireless encrypted communication.
/
/
/
/
/
/
/
/
Saves the WIRELESS SETTING settings. When the WIRELESS SETTING is
not changed, you cannot select SAVE SETTINGS.
EN-32