Mitsubishi Electric TX20U User Manual page 56

Advanced display utilities (continued)
3. Click the [Exceptions] tab, check the [Remote
Desktop] checkbox and click [OK].
In Windows XP
1. Select [Start]-[Control Panel].
2. Click [Network and Internet Connections].
• When using Classic View, double-click the
Windows Firewall icon and go to step 4.
3. Select [Windows Firewall].
• The "Windows Firewall" window is displayed.
4. Click the [Exceptions] tab, check the [Remote
Desktop] checkbox and click [OK].
Installation of software
Installing Thin Client
Before starting installation, be sure to read
"ReadMe.txt" contained in the CD-ROM.
1. Copy "ThinClient_v200.exe"
TOOLS folder of CD-ROM to the hard disk of your
computer.
2. Double-click "ThinClient_v200.exe" on the hard disk,
and start up the installer of the Thin Client.
• Follow the on-screen instructions to install the
software.
• When the "Windows Security Alert" window is
displayed during installation, proceed as follows:
- In Windows XP or Windows Vista, click
[Unblock].
- In Windows 7, click [Allow access].
3. When the installation has been completed, restart
the computer.
When deleting ThinClient (Uninstallation)
1. Select [Start]-[All Programs]-[Thin Client]-[Uninstall
Thin Client].
• Follow the on-screen instructions to uninstall the
software.
contained in the
EN-56
Connection
Connect the projector and the computer using a
commercially available LAN cable. Connect a USB
mouse and USB keyboard to the USB-A terminal on the
projector.
Computer
To LAN
terminal
LAN cable
(option)
Important:
• On Thin Client, use both a keyboard and mouse. We
recommend a commercially available wireless
keyboard and wireless mouse intended for a
computer with wireless receiver.
• For wired LAN connection, use a category-5 LAN
cable. Both straight-through and crossover cables
can be used.
• The USB-A terminal on this projector is compatible
with USB 2.0.
• Supported USB devices are standard USB HID
devices with power consumption less than 5V/
500mA or wireless LAN modules.
• Some USB wireless LAN adapters cannot be used
depending on the specifications.
• When using a USB hub, you are recommended to
use the one with external power supply.
• Some USB hubs cannot be used depending on the
specifications.
Operation
Selecting a LAN Display input
1. Press the SOURCE button and select LAN DISPLAY.
• When the LAN Display input is selected, the
splash screen for LAN Display appears on the
screen.
To USB-A
terminal
Wireless keyboard
and mouse