Siemens SIMATIC Ident MV340 System Manual page 98

Data Validation
Error Messages
The following is a list of potential error messages.
15434 ERROR: DATA ELEMENT SEPARATOR
15434 ERROR: DOUBLE TRAILER
15434 ERROR: FORMAT INDICATOR
15434 ERROR: HEADER - 1ST POSITION
15434 ERROR: HEADER - 2ND POSITION
15434 ERROR: HEADER - 3RD POSITION
15434 ERROR: HEADER - 4TH POSITION
15434 ERROR: HEADER - GROUP SEPARATOR
15434 ERROR: TRAILER - END OF TRANSMISSION
15434 ERROR: TRAILER - RECORD SEPARATOR
PNR ERROR: TOO LONG
PNR ERROR: TOO SHORT
PNR ERROR: CHARACTER
30P ERROR: TOO LONG
30P ERROR: TOO SHORT
30P ERROR: CHARACTER
240 ERROR: TOO LONG
240 ERROR: TOO SHORT
240 ERROR: CHARACTER
UII ERROR: DATA ELEMENT CHARACTER
UII ERROR: DATA ELEMENT TOO LONG
UII ERROR: DATA ELEMENT TOO SHORT
UII ERROR: LOWER CASE CHARACTER
UII ERROR: NEED UII ELEMENT FIRST
UII ERROR: SPACE AFTER TEI DATA QUALIFIER
UII ERROR: TEI DATA QUALIFIER
UII ERROR: UII ELEMENT INCOMPLETE
UII ERROR: WRONG FORMAT INDICATOR
UII ERROR: UII STRING TOO LONG
Additional Notes
• DF1 – DF7: If the UII/CPN field is "(15434 ERROR: xxxx)", DF1 – DF7 are filled in with
an empty string. Otherwise, the fields are used to display data elements. If there are
fewer than seven data elements, an empty string is filled in at the end. If there are more
than seven elements, only the first seven elements are displayed.
• There is a space between UII and CPN in both tables (UII:12345678 CPN:87654321).
• The constructed UII type can be Contruct_1, Contruct_2, Construct_1_2, or
IUID_EQUIVALENT.
• The constructed CPN type can be PNR, 30P, or 240. The constructed LBN type can be 30T.
7-12
SIMATIC MV340 User's Manual