Table of Contents
Advertisement
Using ESP
Advanced Tab
The Auto Sync dialog on the Advanced tab allows you to determine whether Auto Sync
will be automatically enabled in sections of ESP where it is used, or if it will ask you before
it enables Auto Sync functions.
Always Ask Before Auto Sync Occurs
If you check this option box, you are then able to determine what specific Auto Sync
functions will be enabled. Receive Settings from the Reader will automatically send
the imager's settings to ESP when Auto Sync is enabled. Send ESP Settings to the
Reader will automatically send all imager configuration settings chosen in ESP to the
imager. Do Not Send or Receive Settings creates a condition in which Auto Sync will
not send imager settings to ESP, or send ESP settings to the imager.
Include Preamble and Postamble with Send Save
Sends Preamble and Postamble settings along with other settings when a Send and Save
is performed.
Send XON with Auto-Connect
Sends an XON (Begin Transmission) command to the imager before starting the Auto-Connect
routine.
2-11
SIMATIC MV340 User's Manual
Advertisement
Chapters
Table of Contents
