Siemens SIMATIC Ident MV340 System Manual page 25

Using ESP
Terminal Tab
When Show Non-Printable Characters
is checked, characters such as
'CRLF' will be displayed in the terminal
window. When the Enhanced Format
radio button is checked, subscript and
superscript formatting is shown.
When Display incoming data even
when not in focus is checked, data
from the imager will continue to
appear in the terminal even when
ESP is not the top window on the host
computer's screen.
When Enable Echo is checked, the
terminal window displays user-entered
data.
Change Keyboard Macros
Clicking the Change Keyboard Macros
button brings up the Function Keys
dialog. In this dialog you can select the
desired function key and then enter
your macro keystrokes in the associated
key map. For example, to make Ctrl-F2
the keystroke to send a trigger character,
select F2, then in the Ctrl row, enter
<trigger character> and click OK.
Then whenever the Ctrl-F2 keystroke is
pressed, the trigger character will start
the read cycle.
Note: The F1 key is reserved for opening ESP Help and the F3 key is reserved for the
Find Next function.
Change Font
Sets the font characteristics for data received from the imager.
Change Echo Font
Sets the font characteristics of user-entered data.
2-9
SIMATIC MV340 User's Manual