Siemens SIMATIC Ident MV340 System Manual page 101

Illumination Settings by ESP
The SIMATIC MV340's illumination settings can also be controlled using the graphic inter-
face on the Illumination tab in ESP's I/O Parameters view.
Define how many illumination
steps (1 - 8) the imager will cycle
through during its sequence.
Gain can be controlled using
the sliders shown in each Step
dialog when the Gain Control
Manual box is checked.
SIMATIC MV340 User's Manual
Click this button to default settings
for the SIMATIC MV340 illumination
sequence.
Advanced Operations
Click Create Bar Code to
encode illumination settings
in a programming symbol.
Select Low
Resolution
Image for
larger symbols.
Image Enhance
features apply
advanced image
processing to
improve the
readability of the
mark.
8-3