Philips S9000 Series Manual page 46

46
English
Problem
Water is leaking
from the bottom of
the appliance.
Philips Quick Clean Pod
Problem
My shaver isn't clean
after using the Philips
Quick Clean Pod.
My Philips Quick Clean
Pod does not switch on.
Possible cause
During cleaning,
water may collect
between the inner
body and the outer
shell of the
appliance.
Possible cause
You removed the shaver
before the cleaning
program was finished.
The Philips Quick Clean
Pod Cartridge needs to
be replaced.
The Philips Quick Clean
Pod is tilted.
The Philips Quick Clean
Pod is powered by the
motor of the shaver.
The shaver is connected
to the wall socket.
The shaver battery is
empty.
Solution
This is normal and not dangerous
because all electronics are
enclosed in a sealed power unit
inside the appliance.
Solution
Leave the shaver in the
Philips Quick Clean Pod
for the full cleaning
program. Each cleaning
program takes
approximately 1 minute.
The cleaning icon goes
out when the cleaning
program is finished.
Replace the Philips
Quick Clean Pod
Cartridge.
Place the Philips Quick
Clean Pod on a flat
surface.
Place the shaver into the
Philips Quick Clean Pod.
Switch on the shaver.
Disconnect the shaver
from the supply unit.
Charge the shaver
before using the Philips
Quick Clean Pod.