Philips S9000 Series Manual page 40

40
English
Icon Behavior
Becomes visible on the Quick
Clean Pod
Frequency of use
Every day
A few times per week
Do not tilt the Quick Clean Pod to prevent leakage.
Using the Quick Clean Pod
Note: If you use the shaver with shaving foam, shaving
gel or pre-shave products, thoroughly rinse the shaving
heads before you use the Quick Clean Pod (see 'How do I
clean my appliance and the attachments?').
Always shake excess water off the shaver before you
place it in the Quick Clean Pod.
1 Place the shaver upside down into the Quick Clean
Pod. While switched on, the shaver automatically
detects that it is in the Quick Clean Pod.
2 Switch on the shaver to start the cleaning program.
Each cleaning program takes approximately one
minute. During the cleaning program the remaining
time is displayed as a countdown clock on the handle.
3 Let the shaver air-dry completely in the Quick Clean
Pod before storing it.
What does the icon on my Quick Clean Pod mean?
Replacing the Quick Clean Pod Cartridge
Replace the Quick Clean Pod Cartridge immediately
when the cartridge replacement icon on the Quick Clean
Pod becomes visible or follow the table below.
Cycles
About 30
About 20
Meaning
The Quick Clean Pod Cartridge
needs to be replaced (see 'How do
I use the Quick Clean Pod?').
When to replace the
Quick Clean Pod
Cartridge
Every month
Every 2 months