Philips S9000 Series Manual page 37

Cleaning the click-on attachments
1 Make sure that the appliance is switched off and
disconnected from the wall socket.
2 Push the trimmer release slide down to open the pop-
up trimmer.
3 Switch on the appliance and rinse the pop-up trimmer
with warm water.
4 After cleaning, switch off the appliance.
5 Carefully shake off excess water and let the pop-up
trimmer air dry.
6 Close the trimmer.
Tip: For optimal performance, lubricate the teeth of the
pop-up trimmer with a drop of mineral oil every six
months (oil not included).
Never dry the trimmer or beard styler attachments with a
towel or tissue, as this may damage the trimming teeth.
The accessories supplied may vary for different products.
The box shows the accessories that have been supplied
with your product.
Cleaning the beard styler attachment
Clean the beard styler attachment after each use.
1 Pull the comb off the beard styler attachment.
Note: Grab the comb in the center to pull it off the
beard styler attachment. Do not pull at the sides of
the comb.
37
English