How Do I Charge My Appliance - Philips S9000 Series Manual

How do I charge my appliance?

Charging with the supply unit
'Unplug for use' symbol
Charging in the charging stand
Note: This appliance is waterproof. It is suitable for use in
the bath or shower and for cleaning under the tap. For
safety reasons, the appliance can therefore only be used
without cord.
- Charge the appliance before you use it for the first
time and when the remaining battery charge
indicates that the battery is almost empty.
- Charging takes approx. 1 hour.
- Quick Charge: After approx. 5 minutes of charging,
the battery contains enough energy for one full shave.
When the battery is charged to 10 %, you can
complete one full shave.
- When the appliance is fully charged it has a cordless
operating time of up to 60 minutes.
Note: You cannot use the appliance while it is
charging.
1 Make sure that the appliance is switched off.
2 Insert the small plug into the appliance and put the
supply unit in the wall socket.
- While the appliance is charging, an animation
appears on the display showing the progress.
- When the appliance is fully charged, the battery
percentage shows 100 % and the battery icon
shows the battery being full.
3 After charging, remove the supply unit from the wall
socket and pull the small plug out of the appliance.
The 'unplug for use' symbol displays to remind you to
disconnect the appliance from the wall socket and
remove the small plug from the appliance before you
switch it on.
1 Make sure the appliance is switched off.
29
English