Philips S9000 Series Manual page 21

Synchronize your shaves
Unpair the shaver and smartphone
5 Once paired, the shaver and app connect
automatically when the app is open and Bluetooth on
your phone is switched on.
This shaver stores your shave data so you don't need to
take your smartphone with you when you shave or want
to check your shave data at a later stage.
When the data storage is almost full, you receive a
notification reminding you to synchronize your shaves. To
prevent data loss, synchronize the shaver with the app
(see 'How do I connect my shaver and smartphone? (Fig.
A)').
1 Make sure your phone is close to the shaver and open
the app.
2 The app connects automatically and synchronizes
your last shaves.
You can pair your shaver with only one smartphone at a
time. To unpair your shaver from your smartphone (e.g.
when you get a new smartphone), follow these steps:
Unpair the shaver
1 Toggle through the menu items by pressing the menu
button until you reach the Bluetooth menu (the
fourth menu).
2 Press and hold the menu button until you are
presented with a cross and check mark selection.
21
English