Recycle Feature - Gw - Fisher & Paykel IWL12 Service Manual

517766B
16.9 Recycle Feature – GW
At the end of servicing, the machine may require an extended test where the machine can
be left to complete a number of wash cycles. By turning on the RECYCLE feature the
machine will continuously repeat the wash cycle until the RECYCLE feature is turned off.
To activate or deactivate the RECYCLE feature: Enter diagnostic mode, the WATER
LEVEL UP button toggles this feature on and off. If the Medium Water Level LED is on the
RECYCLE feature is on, if the Medium Water Level LED is off the RECYCLE feature is off.
Whether or not the RECYCLE feature is on is indicated during normal use of the machine
as follows:
When the machine is first turned on:
1. If none of the 3 right most wash progress LED's are on, the recycle feature is off.
2. If all 3 of the right most wash progress LED's flash, the recycle feature is on and
SmartDrive will continuously recycle.
NOTE - This feature is designed as a service aid only and should be OFF in the
customer's home. To return to normal operation, and to return the recycle feature to the
factory setting, switch the machine off at the wall or disconnect from the mains supply.
16.9.1 Recycle Feature - IW
In the Control Option mode (as for setting the RESTART feature), pushing the Adjust
button to highlight the word RECYCLE will toggle this feature on and off. At the end of
servicing, the machine may require an extended test where the machine can be left to
complete a number of wash cycles. By turning on the RECYCLE feature the machine will
continuously repeat the wash cycle until the RECYCLE feature is turned off.
Whether or not the RECYCLE feature is on
is indicated during normal use of the
machine as follows:
When the machine is first turned on:
1. If none of the Fabric Care LED's are
on, the recycle feature is off.
2. If all of the Fabric Care LED's flash,
the recycle feature is on.
NOTE - This feature is designed as a service aid only and should be OFF in the
customer's home. To return to normal operation, and to return the recycle feature to the
factory setting, switch the machine off at the wall or disconnect from the mains supply.
- 24 -
May 2004
Hot Tub Flag