Siemens LDS 6 Operating Instructions Manual page 19

Installation Guidelines
ATEX manual for LDS 6
A5E01206710-02
Handling of Roxtec gaskets used with CD 6 sensors.
The loop and hybrid cables connected to the CD 6 sensors are fit-
ted with Roxtec gaskets. To make sure the sensors are sealed
appropriately, the gaskets must be correctly mounted. When the
gaskets are delivered together with the cables they are fitted in
the protection tubes.
When mounting the gaskets in the sensor, please proceed as fol-
lows:
•
Once the sensors are mounted, remove the cables and gas-
kets from the protection tubes by unscrewing the fixation
screws.
•
Lubricate the gaskets with the supplied lubricant.Make sure to
cover both inside and outside surfaces.
13