Door Control; Battery Backup - Chamberlain 98022 User Manual

Operation

Door Control

Battery Backup

The battery backup allows access in and out of your garage
when the power is out. When the garage door opener is
operating on battery power, the garage door opener will
run slower and the lights, Timer-to-Close, and remote
close features (myQ App) are disabled. In battery backup
mode, the Automatic Garage Door Lock will unlock when
the garage door is opened, and will remain disabled until
power is restored. During a power outage the battery
supplies power for up to 24 hours of operation. For
maximum battery life and prevent damage, disconnect the
battery when the garage door opener is unplugged for an
extended period of time.
• Solid green LED - Charged battery
• Blinking green LED - Charging battery
• Solid orange LED with beep - Operating on battery power
• Blinking orange LED with beep - Low battery
• Solid red LED with beep - Replace battery
NOTE: Be sure the short antenna is not pinched by the
battery door and held in place as shown.
Push Bar:
Open/Close garage door.
Navigation Buttons:
Access menu:
Clock Setup, Timer-to-Close, Lock, Program, Temperature,
Language, Light Settings, Contrast Adjust, Maintenance
Alert System, and Wi-Fi Setup.
Motion Sensor
Light Button
Tip: To stop the Smart Control Panel LCD from displaying
"CONNECT myQ APP":
On the Smart Control Panel
PROGRAM and
return to the main screen.
, press MENU, select
®
, press BACK, then press EXIT to
Battery Status LED
Red wire (+)
Black wire (-)
Antenna
11