Table of Contents
Advertisement
Open the loading door, place the laundry
and put detergent, etc. Select the washing
programme, temperature, spin speed and,
if required, the auxiliary functions. Set the
desired time by pressing the Delayed Start
button. When the button is pressed once,
3 hours delayed start is selected. When
the same button is pressed again, 6 hours
delay is selected, and when it is pressed
for the third time, 9 hours delayed start is
selected. If you press the Delayed Start
button once again, Delayed Start function
will be canceled. Press Start / Pause
button. Previous delayed start time light
turns off and next delayed start time light
turns on after every 3 hours. At the end of
the countdown, all delayed start lights will
turn off and the selected programme will
start.
C
Additional laundry may be loaded
during the delayed start period.
Changing the Delayed Start period
Press Delayed Start button. Every time the
button is pressed, the period will change
in 3-hour increments and the light of the
selected delayed start time will turn on.
Cancelling the Delayed Start function
If you want to cancel the delayed start
countdown and start the programme
immediately:
Set the Delayed Start period to zero (all
delayed start period lights will turn off)
or turn the Programme Selection knob
to any programme. Thus, Delayed Start
function will be canceled. The End/Cancel
light flashes continuously. Then, select
the programme you want to run again.
Press Start / Pause button to start the
programme.
Starting the programme
Press Start / Pause button to start the
programme. Programme follow-up light
showing the startup of the programme will
turn on.
C
If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
machine will switch to Pause mode and
the illumination level of the temperature,
speed and loading door indicator lights
will decrease. Other indicator lights
and indicators will turn off. Once the
Programme Selection knob is rotated
or any button is pressed, indicator
lights and indicators will turn on again.
Child Lock
Use child lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
C
If the Programme Selection knob is
rotated when the child lock is active,
the lights on the 1
function buttons will blink 3 times. The
child lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary
functions.
C
Even if another programme is selected
with the Programme Selection
knob while the Child Lock is active,
previously selected programme will
continue running.
C
When the Child Lock is active and the
machine is running, you can switch
the machine to Pause mode without
deactivating the Child Lock by turning
the Programme Selection knob to
On / Off position. When you turn the
Programme Selection knob afterwards,
the programme will resume.
To activate the Child Lock:
Press and hold 1
Function buttons for 3 seconds. The lights
on the 1
and 2
st
will flash while you keep the buttons
pressed for 3 seconds.
To deactivate the Child Lock:
Press and hold 1
function buttons for 3 seconds while any
programme is running. The lights on the 1
and 2
Auxiliary Function buttons will flash
nd
while you keep the buttons pressed for 3
seconds.
C
In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On
/ Off position when no programme
is running, and select another
programme.
C
When the power is restored after a
power failure or after your machine
is unplugged and plugged in again,
the Child Lock will not be deactivated
when the machine resumes operating.
23
EN
and 2
auxiliary
st
nd
and 2
Auxiliary
st
nd
Auxiliary Function buttons
nd
and 2
auxiliary
st
nd
st
Advertisement
Table of Contents
