Table of Contents
Advertisement
Hawk 2LP Family Installation Guide, Rev. A
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Notes for Figure 3a and 3b:
[1] Notes explaining the functions of the various jumpers on
jumper header connectors J2, J5 and J6 are given below
in left to right order of jumper position. The term "default"
means as standard OEM units are configured when shipped
from factory. "Off" means no jumper is installed; "On"
means a jumper is installed. Off or On underlined is factory
default condition.
Suggested part number for the unusual J2 jumper is
Molex 52747-0211 (Seagate P/N 77679052).
[2] "ND" models do not have terminators on the drive PCB, so
these jumpers are not applicable.
25
Advertisement
Table of Contents
