CYCLE PARTS
5.10. CLUTCH
5.10.1.
BLEEDING THE CLUTCH CIRCUIT
•
Connect the hose to the clutch pump bleed nipple.
•
Operate the clutch lever and open the pump bleed nip-
ple slightly to allow the air to escape.
•
Close the nipple before reaching the lever's full stroke
and repeat the operation until no more air issues from
the nipple.
•
Connect the hose to the clutch control cylinder bleed
nipple.
•
Operate the clutch lever and open the cylinder bleed
nipple slightly to allow the air to escape.
•
Close the nipple before reaching the lever's full stroke
and repeat the operation until no more air issues from
the nipple.
•
To be quite sure of the result, repeat the pump bleed
operation.
5 - 132
RSV 1000 R - RSV 1000 R FACTORY