Table of Contents
Advertisement
Setting Up the TV/VCR
Startup
Place the TV/VCR in a location where it is safe to operate.
5. Turn on the TV/VCR.
Press
POWER button on the front of the TV/VCR will light.
The first time you turn on the TV/VCR, or after a power
interruption, the TV/VCR will display the AUTOMATIC CLOCK SET
menu.
6. Set the clock and auto channel search
automatically.
When the AUTOMATIC CLOCK SET screen appears, follow these
steps to automatically place channels in the TV/VCR's memory and
set the clock using the Coordinated Universal Time information
transmitted by some broadcast stations.
A. Press a number (1-6) on the remote corresponding to the time
B. Press 1 if your area observes daylight savings time from April to
C. Press MENU on the remote if all antenna or cable connections are
Set the clock manually.
If the AUTOMATIC CLOCK SET was unsuccessful or you want to
manually set the clock:
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 3 to display the TIME menu.
C. Press 1 to display the SET CLOCK screen.
D. Use the number buttons on the remote to enter the time including
E. Press MENU on the remote to start the clock.
4
POWER on the TV/VCR or remote. The indicator in the
zone you live in. If you do not know your time zone, press 7.
October, or press 2 if it does not. If you do not know, press 3.
completed. The AUTO CHANNEL SEARCH will be performed,
followed by automatic clock set.
If The Auto Clock Set was unsuccessful message appears, then
set the clock manually. The clock must be set before you can use
the timer recording or wake-up timer features.
If you change your cable or antenna signal, and need to manually
place channels in memory:
1. Press MENU on the remote to display the TV/VCR MAIN
MENU.
2. Press 5 to display the SETUP menu.
3. Press 1 to Auto channel search.
AM or PM, month, day, and year. The day of the week will
automatically appear after you enter the year.
• Press 0 before single-digit numbers. Press 1 for AM or 2 for
PM. Example: press 0, then 5, then 0, then 7, then 2 for a
time of 5:07PM.
• Press CLEAR on the remote at any time to change incorrect
entries.
To display the time and date, press DISPLAY on the remote.
AUTOMATIC CLOCK SET
What is your Time Zone?
1 Eastern
2 Central
3 Mountain
4 Pacific
5 Alaska
6 Hawaii
7 Don't know
AUTOMATIC CLOCK SET
Does your area observe
Daylight Savings Time
from April to October?
1 Yes, DST is observed
2 No
3 Don't know
AUTO CHANNEL SEARCH
Now scanning channel 1
AUTOMATIC CLOCK SET
The TV/VCR is now
setting the clock.
This may take
several minutes.
Press MENU to cancel
TV/VCR MAIN MENU
1 Timer Recordings
2 Picture Quality
3 Time
TIME
1 Set clock
SET CLOCK
Time --:-- - -
(hour:minute)
Date --/--/--
SET CLOCK
Time 05:07 AM
Date 07/13/96 Saturday
Press CLEAR to correct
Press MENU to set
Advertisement
Table of Contents
