Table of Contents
Advertisement
Using the Remote Control
Buttons
Numbers (0 through 9)
Select a channel up to 99 by pressing two
numbers.
Select a cable channel over 99 by pressing
and holding 1 until 1– – appears on the
screen. Then press the other two
numbers.
PAUSE
Pauses the tape during playback.
Pauses recording to prevent recording of
unwanted scenes.
PLAY
Plays a tape.
POWER
Turns TV/VCR on or off.
PREV CH (Previous channel)
Switches between the last two channels.
Select one channel and then select the
other using the number buttons. Press
PREV CH to switch between the two
channels.
REC (Record)
Starts TV/VCR recording.
Used for express recording.
RESET
Resets video functions to factory settings.
Used to reset time for wake-up timer
(alarm).
REW (Rewind)
Rewinds the tape when the TV/VCR is
stopped.
Searches the picture in reverse motion
during playback.
SEARCH
Displays INDEX, ZERO, and BLANK search
screens.
Advances tape during playback.
SLEEP
Sets TV/VCR to automatically turn off in 30,
60, 90, or 120 minutes.
SLOW
Used for slow-motion playback on tapes
recorded in SP and SLP.
SPEED (Tape Speed)
Selects a recording speed
(SP or SLP).
STOP
Stops functions such as record, playback,
rewind, fast forward, and pause.
TRACKING Up or Down
Lets you manually reduce the streaks that
may appear in the picture during playback.
VOL (Volume) + or –
Raises and lowers sound.
7
Advertisement
Table of Contents
