Table of Contents
Advertisement
Recording a Program
Recording While You're Away (VCR Plus+ Recording)
The VCR Plus+ recording feature let you program the VCR to record up to eight different programs within a one month
period. Before using VCR Plus+ to record a program, make sure that:
• The clock is set correctly.
• A tape with safety tab has been inserted with enough tape to record the programs.
• The TV/VCR is setup for VCR Plus+ programming.
Setting a VCR Plus+ Recording
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Insert a Tape with safety tab intact before the recording is to
11. If using a cable box, turn it on and tune it to the channel
26
Press MENU on the remote to display the TV/VCR MAIN
MENU on the
screen.
Press 1 to display the TIMER RECORDINGS menu.
Press 3 to display the VCR PLUS+ menu.
Press numbers on the remote to enter PlusCode number for
the program you want to record. VCR PlusCode numbers
are found in most local TV listings.
Press CLEAR on the remote to correct an entry.
Press MENU to enter the program.
If the TV/VCR does not recognize the PlusCode number,
...invalid Plus Code. Please re-enter... appears on the TV
screen. Check the number and enter it again.
Press 1, 2, 3, or 4 to select type of program.
1 One time – single program recorded once.
2 Daily – program recorded at same time every day.
3 Weekdays – program recorded at same
time Monday through Friday.
4 Weekly – program recorded at same time
once a week.
Select recording speed using SPEED on the remote.
Press MENU to enter your program. A reminder appears
which will time out.
• If you have entered two programs whose times overlap,
"PROGRAMS OVERLAP" appears on the screen.
The TIMER RECORDINGS menu appears. Press 3 to enter an
additional VCR plus+ program, or press 0 to exit.
begin.
The TIMER indicator lights in the TV/VCR's front panel.
If you turn the TV/VCR off, the TIMER indicator will frash if
there is no cassette in the TV/VCR or the safety tab is
missing from the cassette.
you want to record before time for recording to begin.
TV/VCR MAIN MENU
1 Timer Recordings
TIMER RECORDINGS
1 Create a new program
2 Review existing progs.
3 Use VCR Plus+ code
VCR PLUS+
Enter PlusCode number
(from TV listing)
-
When should this
program occur?
1 One Time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
Program 1 (One time)
Channel
08
Start time 06:00 AM
End time
08:00 AM
Start date 07/28/96 Sun
Tape speed SLP
Press CLEAR to correct
Press MENU to save
Program 1 has been saved
Remember to insert a
recordable tape before
the program start time.
POWER
CH
–
+
VOL
VOL
STOP/EJECT
CH
REW
PLAY
F.FWD RECORD
TIMER
REPEAT
WAKE-UP
TIMER Indicator
Advertisement
Table of Contents
