Table of Contents
Advertisement
Hooking Up the TV/VCR
Connect a VCR or Camcorder for Copying Tapes
A. VCR for Copying Tapes
1. Connect as shown.
This connection requires additional accessories
not provided.
2. Plug in power cords of VCR and
TV/VCR.
3. Turn to page 30 for "Copying and Editing
Tapes."
Press INPUT on the remote to select the line
(audio/video) input on the TV/VCR to receive
the signal from the VCR.
If your VCR has stereo AUDIO OUT jacks,
connect the audio cable to the jack labeled
MONO. If neither jack is labeled MONO, you
may need a Y- adapter to hear both channels.
B. Camcorder for Copying
Tapes
1. Connect as shown.
This connection requires additional accessories
not provided.
2. Plug in TV/VCR's power cord.
3. Turn to page 30 for "Copying and Editing
Tapes."
Press INPUT on the remote to select the line
(audio/video) input on the TV/VCR to receive
the signal from the camcorder.
If your camcorder has stereo AUDIO OUT jacks,
you may need a Y- adapter to hear both
channels.
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.
A
VCR (Playback Only)
AUDIO1
VIDEO1
VIDEO IN
Front of TV/VCR
(Recording Only)
B
Audio/Video
Cable
(optional)
Yellow
Video
Plug
VIDEO IN
L—AUDIO IN—R
Front of TV/VCR
(Recording Only)
R
IN FROM
ANT.
L
VHF/UHF
OUT TO TV
OUT
IN
3 CH. 4
Audio/Video
Cables
L—AUDIO IN—R
Camcorder
(Playback Only)
White
Audio
Plug
Y-Adapter
(optional)
35
Advertisement
Table of Contents
