Programmed Operation - Panasonic WEDEATSU EP1061 Operating Instructions Manual

PROGRAMMED OPERATION

• Please check that there are no children or pets in the vicinity of the unit before use.
1
neck roller position reclining
3
programmed manual
/
operation operation
programmed operation
storong
2
whole back
neck, shoulder
4
vibration on/off
5
The Selected Program will Start
• It is possible to change the program
selected and the desired movement
mid-way through a massage.
• In Programmed Operation, the leg massage begins at the same time.
It is possible to stop or change the intensity of the leg massage during the program. (Please see Page 18.)
• When retracting the backrest, as the massage heads must be retracted in the interests of safety there may be
a slight delay before the backrest actually starts to retract. Please continue to hold down the Reclining Button
until the backrest is fully retracted.
The Seat Automatically Reclines to the Massage Position
• Initial position if auto recline is for both back and open ottoman operation. (for soles and feet.)
• To recline further, please use the recline button, but it is not recommended to keep the ottoman open.
Normal Position
(EP1061)
Normal Position
(EP1060)
3. Adjusting Shoulder Position
• When programmed operation begins, the seat automatically reclines to the massage position where the
massage heads carry out a Shiatsu massage in the area around the shoulders. During the time that the
Shoulder Position Indicator is flashing (approx. 20 seconds), use the Shoulder Position Adjustment Button to
adjust the position of the massage heads, limiting how high they will go.
Approximate positions for adjusting the position of the rollers are shown below.
• It is possible to change the position of the rollers
during the massage.
• As the position of the shoulders will change when
the reclining angle is changed during a massage,
please readjust the shoulder position every time
you change the reclining angle.
All manuals and user guides at all-guides.com
1. Press
• The ON/OFF lamp will come on.
• You can now select either strong or gentle or one of the manual settings
that can be accessed by opening the cover of the controller.
2. Select the Program You Want
• See Page 21 for details regarding the content of each of these
programs.
Vigorously Massage the Whole Back
• Strong uses mainly a kneading massage and Shiatsu massage to
relax stiff muscles.
gentle
• This type of massage is ideal for
people with stiff muscles
throughout their entire back.
lower back
• Massage starts out predominantly in
the upper back.
Gently Massage the Whole Back
tap on/off
• This type of massage is ideal for
people who are feeling tired or weary.
• It is gentler than shiatsu massage -
more like a sewedish palm massage.
Reclining
Reclining
button
Massage Position
In this comfortable
position it is possible to
massage from the neck
to the soles of the feet.
Massage Position
In this comfortable
position it is possible to
massage from the neck
to the soles of the feet.
Up Down
neck roller position neck roller position
Press
programmed operation
strong gentle
whole back
Press
programmed operation
strong gentle
whole back
Press
Approx. 3° Reclined
Approx. 14°
Raised
Approx. 14° Reclined
Approx. 60°
Raised
Approximate Body Height
neck roller position
6.1ft
5.2ft
Press
4.6ft