Panasonic WEDEATSU EP1061 Operating Instructions Manual page 17

E.g.2 Changing to a massage type outside the category.
(Changing to Tap B when Knead is selected.)
• When Knead is combined with Tap B, deselecting Knead will leave only Tap.
manual operation
shiatsu swedish knead
vibration tap A tap B
whole back regional
roll
4. Adjusting Manual Massage Settings
Adjusting the Vertical Position of the Massage Heads
• The massage heads will move a little each time the button is
pressed. If you hold down the button, the massage heads will
continue to move until you release the button. When the
massage heads reach their limit you will hear a "peep, peep,
peep" sound.
Adjusting the Width between Massage Heads
• Vibration, Tap, Shiatsu Whole Back Roll, and Regional Roll
can be adjusted in 5-stages while Swedish (gentle) can be
adjusted in 3-stages.
• As Swedish covers the entire width of the back, it is not
possible to adjust width settings.
• The massage heads will move a little each time the button is
pressed. If you hold down the button, the massage heads will
continue to move until you release the button.
• When the massage heads reach their limit you will hear a
"peep, peep, peep" sound.
Adjusting Massage Intensity
• Massage intensity can be adjusted up to 3 levels.
• When the massage heads reach their limit you will hear a "peep,
peep, peep" sound.
• As Roll or combining Roll with other massages sometimes
produce an especially strong massage, adjustment is limited
to medium or weak.
Roll, Roll + (Shiatsu, Tap B, Tap A, Vibration) Combination..................................Weak/Medium only
Roll + (Knead, Swedish Combination) ...................................................................Weak only
• For Tap B, Swedish, and Vibration, unless the massage heads are actually touching the body then you may
not feel the movement.
5. Auto Stop in Manual Operation
• A timer will automatically stop the unit approximately 15 minutes (15–17 minutes) after the massage started.
(This is to prevent overuse in the interests of safety.)
• The massage heads will move to the retracted position and stop.
• The ON/OFF lamp will flash until the heads have stopped moving.
• If you want to start another massage, please press
• Please rest at least 10 minutes between massages.
6. Stopping Manual Operation
Press button to stop manual operation.
• The ON/OFF lamp will continue to flash until the massage heads have returned to the retracted position.
All manuals and user guides at all-guides.com
manual operation
shiatsu swedish knead
vibration tap A tap B
Press
whole back regional
roll
manual operation
shiatsu swedish knead
Press
vibration tap A tap B
whole back regional
roll
Raising the massage heads
Increasing the width
Increasing massage intensity
button.
Lowering the massage heads
position position
Press
Decreasing the width
position position
Press
Decreasing massage intensity
intensity intensity
Press
Press
Press
Press