Programmed Massage -- Ere - Panasonic EP1011 Operating Instructions Manual

PROGRAMMED MASSAGE ;
First familiarize yourself with the safety precautions.
<HOW TO PRESET THE MASSAGE HEAD POSITION>
1. Press "start/reset" button with cover closed.
2. Set the massage heads adjustment switch to position "7".
Then adjust the massage heads to your shoulders while moving the adjustment switch.
The massage heads operation lamp blinking while moving the massage heads.
3. You can adjust the massage heads position while massaging.
NOTE: When you find your favourite position, memorize the number which is printed near the switch.
<HOW TO SELECT THE PROGRAMMED MASSAGE COURSE>
1. If you wish to massage your whole back, press the "whole back" button.
2. If you wish to massage your neck and shoulder mainly, press the "neck shoulder" button.
3. If you wish to massage your lower back, press the "lower back" button.
e Massage will operate automatically for 15 minutes after pressing the button.
NOTE: Check to be sure the course indicator lamp is lit.
e If you wish to change the massage course, press any button you want.
You may change the massage course at any time during operation without harm.
Your new instructions will override any previous ones.
programmed operation programmed operation
programmed operation
nn int
<whole back> <neck shoulder> <lower back>
<GENTLE MODE FOR PEOPLE WHO FEEL MASSAGE IS TOO STRONG>
Press "gentle mode on/off" button.
e Gentle lights in operation display section.
The entire massage changes to a less intense, gentle massage.
(Course contents do not change.)
e Gentle mode can be selected even in the middle of a programmed massage course.
e Pressing gentle mode button again will cancel gentle mode.
After the automatic course has finished, the massage heads will automatically
move to the "restore" position and stop.
e To perform massage again, press the "start/reset" button on the controller again.
11