Page 1
Instrucciones de uso EP1061/EP1060 EP1061/EP1060 Modelo No. Panasonic Consumer Electronics Company One Panasonic Way 3D-1 Secaucus, New Jersey 07094 EP1061 EP1060 1-800-338-0552 for questions and comments. www.panasonic.com/massage Before operating this unit, please read these instructions completely, and save for future reference.
Thank you for purchasing the Panasonic Swede-Atsu Massage Lounger EP1061/EP1060. Please read this INDEX / íNDICE manual carefully to ensure optimum performance and safety. IMPORTANT SAFETY INSTRUCTIONS English See page 3-28 Basic precautions should always be followed when using an electrical unit, including the following.
SAFETY PRECAUTIONS OPERATING PRECAUTIONS WARNING: To avoid the risk of injury, follow these precautions: WARNING: To avoid damaging to the chair, follow these precautions: 1. Pregnant women, people who are ill, in poor physical shape or undergoing medical treatment, and people 1.
GROUNDING INSTRUCTIONS PART NAMES AND FUNCTIONS • The product must be grounded. If it should malfunction, grounding provides the path of least resistance for SEAT electric current to reduce the risk of electric shock. • This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
PART NAMES AND FUNCTIONS SETTING UP THE MASSAGE LOUNGER CONTROLLER ( EP1061 ) WHERE TO USE THE UNIT CAUTION Cover Closed Cover Open • Do not use the unit in areas with high humidity, such as the bathroom, etc. as this can lead to electric ON/OFF Button Quick Stop Button shock or other accidents.
HOW TO USE THE MASSAGE LOUNGER — INTRODUCTION BEFORE USING THE UNIT • Here you will find an overview of how to use the massage lounger. Please refer to the pages shown for further details. AFTER CHECKING THE SURROUNDING AREA, TURN ON THE POWER 1.
ADJUSTING THE SEAT RECLINING THE SEAT NOTE: BEFORE SITTING DOWN Position the chair at least 16 in. (40cm) away from any wall or other obstacle to ensure adequate reclining space. CAUTION 1. Reclining The Seat reclining • Slowly sit down after checking the position of the massage heads. •...
PROGRAMMED OPERATION • When the Shoulder Position Indicator is flashing, adjust the position of the massage heads (upper roller) so that they lightly touch the shoulder. • Please check that there are no children or pets in the vicinity of the unit before use. •...
MANUAL OPERATION E.g.2 Changing to a massage type outside the category. (Changing to Tap B when Knead is selected.) • When Knead is combined with Tap B, deselecting Knead will leave only Tap. MANUAL OPERATION FOR THE UPPER BODY manual operation manual operation manual operation shiatsu...
AFTER COMPLETING THE MASSAGE LEG MASSAGE IN MANUAL OPERATION ( EP1061 ) • The leg massager has two functions. RETURN THE SEAT TO THE ORIGINAL POSITION Soles of feet Calves The massager can also massage the soles of the feet. 1.
Page 11
DETAILS REGARDING PROGRAMMED OPERATION DISCONNECT THE POWER 1. Turn Off the Power • The movements below are shown in simplified form for the sake of illustration. • When the programs have finished the unit will automatically stop. (Although programmed operation lasts for z Turn the power switch to the “off”...
Page 12
• The movements below are shown in simplified form for the sake of illustration. • The movements below are shown in simplified form for the sake of illustration. • When the programs have finished the unit will automatically stop. (Although programmed operation lasts for •...
DETAILS REGARDING MANUAL OPERATION CLEANING AND MAINTENANCE Shiatsu Tap A PILLOW, BACK CUSHION, SEAT AND ARMREST COVERS This feels as though the thumbs of both This motion resembles the outer edge of • Rub the covers lightly using a soft and dry cloth for normal hands are being used to work on the the fingers being used to tap in a rhythmic cleaning.
TROUBLESHOOTING Problem Cause and Remedy Before requesting service for this unit, check the table below for the possible cause of the problem. Some simple It is not possible to recline the unit. If the unit encounters an obstacle or if excessive checks or minor adjustment on your part may eliminate the problem and restore proper operation.