Using the TV's Features
Parental Controls and V-Chip
The choices in the USA V-CHIP menu involve software inside your product (referred to as
V-Chip) which allow you to block TV programs and movies. Once you set Parental Controls
to block programs, you can unblock programs by entering a password. Remember to activate
Master Enable so your settings take effect.
By default, the software inside your product is turned "off." For instructions to turn on V-Chip,
refer to Activate Parental Control below.
How V-Chip Works
V-Chip reads the program's age-based rating (TV-MA, TV-14, etc.) and content themes
(Violence (V), Adult Language (L), etc.). Broadcasters are not required to provide content
themes, so programs received with no content themes will only be blocked if you block their
age-based rating. You can also block out programs that have been given a rating of Not Rated
and programs that are considered "unrated."
The following sections give you more details about how to change the status of TV program
limits.
Go back
Create Password _ _ _ _
Confirm Password _ _ _ _
Go back
Password _ _ _ _
0
activate Parental Control
This feature lets you activate and deactivate parental control features. Follow
the on-screen instructions to create your password using the number buttons
on the remote. If you forget your password, refer to the bottom of this page for
instructions on how to change your password.
Note: If you don't activate Master Enable
none of the Parental Control features will take effect.
Resetting the Password
If you forget your password, you can reset it. Here is how to do it:
1. Make sure your unit is turned off.
2. Press VOLt on the front panel and CLEAR on the remote for approximately
5 seconds. The TV will turn back on.
3. Enter a new password the next time you access the PARENTAL CONTROL or
the TIME menu.
) and set the password, then
(
Chapter