Explanation Of Jacks - RCA 20F514TD User Manual

Explanation of Jacks

HEADPHONE
This section describes the jacks you can use to make connections. There are several
combinations available to connect devices to your TV/DVD player.
COMPONENT VIDEO (CVID) INPUT
Pr
DVD
DIGITAL
R AUDIO
AUDIO OUT
R AUDIO
COAXIAL
ANTENNA/CABLE
INPUT
(DIGITAL/
ANALOG)
(VID) INPUT
COMPONENT VIDEO (CVID) INPUT
Pr Pb Y
AUDIO/
VIDEO
OUTPUT
R AUDIO L VIDEO
R AUDIO L VIDEO
R AUDIO L VIDEO
COMPONENT VIDEO (CVID) INPUT
Pr Pb Y
R AUDIO L VIDEO
R AUDIO L VIDEO
Chapter 1
Pb Y
(VID) INPUT
L
VIDEO
AUDIO/
VIDEO
OUTPUT
L VIDEO
ANTENNA/CABLE INPUT Connect a coaxial (RF) cable to receive analog and digital
channels through your cable provider. Receive off-air analog and digital programming via an
antenna. Connect either an antenna or cable to receive analog and digital channels. Refer to
page 5 for more details.
COMPONENT VIDEO (CVID) INPUT Connect devices with component (Y Pb Pr) outputs
ANTENNA/CABLE
INPUT
such as VCRs, DVRs, DVD recorders, satellite receivers, cable boxes and video game
consoles. This connection provides optimum picture quality because the video is separated
into three signals. Use the AUDIO L and R jacks from the COMPOSITE INPUT to connect for
(DIGITAL/
ANALOG)
sound.
(VID) INPUT
To access the device when using these jacks, press the INPUT button on your remote until
CVID appears.
AUDIO/
VIDEO
OUTPUT
Refer to page 8 for a detailed explanation of how to connect Y Pb Pr cables.
(VID) INPUT (Composite) Connect devices with Audio/Video outputs such as VCRs,
COMPOSITE
satellite receivers, cable boxes, camcorders and video game consoles. Connect the left and
(VID) INPUT
right audio jacks for sound.
• VIDEO Provides (composite) video connection. The video connector is usually yellow.
• AUDIO-L Provides left audio connection. The left audio connector is usually white.
ANTENNA/CABLE
INPUT
• AUDIO-R Provides right audio connection. The right audio connector is usually red.
To access the device when using these jacks, press the INPUT button on your remote until
VID appears.
(DIGITAL/
ANALOG)
Remember: You cannot use the composite and component connections at the same
(VID) INPUT
time. They share the same AUDIO R/L input jacks.
AUDIO/VIDEO OUTPUT Connect external devices with inputs such as VCRs, video
AUDIO/
VIDEO
recorders or secondary monitors. Audio/video (composite) cables are used for this
OUTPUT
connection.
Remember: Use this jack to output analog TV, DVD video and composite jack
signals.
Connections & Setup
Note: This back panel graphic is for
ANTENNA/CABLE representation only.
INPUT
(DIGITAL/
ANALOG)
Continues on next page...
11