Configure The Settings Relating To The Privacy Zone ("Privacy Zone" Setup Menu) - Panasonic i-Pro WV-SP500 Series Operating Instructions Manual

11.8 Configure the settings relating to the privacy
zone ("Privacy zone" setup menu)
Click the [Setup>>] button of "Privacy zone" on the [Image quality] tab of the "Image/Audio" page.
(®page 83)
When there is a zone that you do not want to display, set the zone as a privacy zone not to be displayed. Up
to 2 privacy zones can be set.
[Area]
The privacy zone will be set when an area is designated by dragging the mouse. Each zone can be overlapped.
Privacy zones 1 and 2 can be created and they will be numbered in the order of creation.
[Display type]
Select a display type of the privacy zone from the following.
•
Gray: The privacy zones will be displayed in gray.
•
Off: Does not display the privacy zones.
•
Default: Off
Note
•
Set the privacy zone larger than the size of an object to be hidden.
[Close] button
Click this button to close the "Privacy zone" setup menu.
IMPORTANT
•
After configuring the privacy zone, the privacy zone may move out of alignment when the JPEG/H.264
"Image capture mode" setting is changed. Make sure to check the privacy zone after changing the
"Image capture mode" setting.
11 Configure the settings relating to images and audio [Image/Audio]
Operating Instructions 97