Panasonic i-Pro WV-SP500 Series Operating Instructions Manual page 192

Hide thumbs Also See for i-Pro WV-SP500 Series:
Table of Contents

Advertisement

22 Troubleshooting
Symptom
Cannot access the camera
from a mobile terminal.
A cookie error was displayed
when performing user
registration for
"Viewnetcam.com".
User registration for the
"Viewnetcam.com" service
fails.
Cannot obtain images on the
SD memory card.
SW559
SW559
SP509
SP509
SF549
SF549
SF539
SF539
192
Operating Instructions
Cause/solution
Is the SSL encryption method different from that of
the camera?
Select "HTTP" (Do not select "HTTPS") for
"HTTPS" - "Connection" on the "Network" page - the
[Network] tab, and access the camera again.
Did you access "http://" while using the HTTPS
function?
To use the HTTPS function, access "https://". It is
also necessary to enter the port number.
Is the URL correct? Or is "/cam" missing at the end
of the URL?
Check if the URL is entered correctly. When
accessing the camera from a mobile terminal, it is
necessary to enter "/cam" at the end of the URL that
is used for the camera access from a PC.
Is the SSL encryption method different from that of
the camera?
Select "HTTP" (Do not select "HTTPS") for
"HTTPS" - "Connection" on the "Network" page - the
[Network] tab, and access the camera again.
Did you access "http://" while using the HTTPS
function?
To use the HTTPS function, access "https://". It is
also necessary to enter the port number.
Is the web browser configured to allow cookies?
Configure the web browser to allow cookies. In
Internet Explorer, from [Tools] select [Internet
Options] and configure the cookies setting in the
[Privacy] tab.
Is the registered E-mail address correct?
When an E-mail with the "Viewnetcam.com" website
link is not received, the registered E-mail address
may be incorrect. Visit the "Viewnetcam.com"
website (http://www.viewnetcam.com/) to register
the correct E-mail address.
Is "Allow" selected for "FTP access to camera" on
the [Network] tab of "Network" page?
It is necessary in advance to select "Allow" for "FTP
access to camera" on the [Network] tab of the
"Network" page.
Is the entered password correct?
Restart the web browser and enter the password
again.
Access to the SD memory card may be failed.
Restart the web browser and retry to obtain images.
Reference pages
145
156
19
141
156
-
-
147
59
-

Advertisement

Table of Contents
loading

Table of Contents