Panasonic i-Pro WV-SP500 Series Operating Instructions Manual page 80

11 Configure the settings relating to images and audio [Image/Audio]
[Transmission priority]
Select a transmission priority for H.264 images from the following.
•
Constant bit rate: H.264 images will be transmitted with the bit rate selected for "Max bit rate (per
client) *".
•
Frame rate: H.264 images will be transmitted with the frame rate selected for "Frame rate*".
•
Best effort: In accordance with the network bandwidth, H.264 images will be transmitted with the bit rate
varying between the maximum and minimum bit rates that are set for "Max bit rate (per client)*".
•
Default: Frame rate
Note
•
When "Frame rate" is selected for "Transmission priority", number of users who can access the camera
may be limited more (may become less than 10).
[Frame rate*]
Select a frame rate for H.264 images from the following.
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*
•
Default: 30fps*
Note
•
When "Frame rate" is selected for "Transmission priority", this setting is available.
•
"Frame rate*" is restricted by "Max bit rate (per client)*". For this reason, the frame rate may be lower
than the specified value when any value marked with an asterisk (*) is selected.
•
For "H.264(1)", when "Main: 15fps/ Sub: 15fps" is selected for the "Frame rate" of picture in picture,
the frame rate is limited to a maximum of 15fps. To enable a maximum frame rate of 30fps, select
"Main: 30fps/ Sub: 1fps" for "Frame rate".
•
For "H.264(2)", when "Alarm trigger 1", "Alarm trigger 2", or "Alarm trigger 3" is selected for the "Picture
in picture mode" of picture in picture, the frame rate is limited to a maximum of 15fps. To enable a
maximum frame rate of 30fps, select "Alarm trigger 4" or "Off" for "Picture in picture mode".
[Max bit rate (per client)*]
Select a H.264 bit rate per a client from the following. When "Best effort" is selected for "Transmission
priority", set the maximum and minimum bit rates.
64kbps/ 128kbps*/ 256kbps*/ 384kbps*/ 512kbps*/ 768kbps*/ 1024kbps*/ 1536kbps*/ 2048kbps*/ 3072kbps*/
4096kbps */ 8192kbps*/ 10240kbps*/ 12288kbps*/ 14336kbps*
•
Default:
–
H.264(1): 4096kbps*
–
H.264(2): 1536kbps*
* The range of bit rates that can be configured for H.264 bit rates differs depending on the "Image capture
size".
•
QVGA, VGA, 320x180, and 640x360: 64kbps - 4096kbps *
•
1280x960 and 1280x720: 256kbps* - 8192kbps *
•
1920x1080: 512kbps* - 14336kbps*
Note
•
When "14336kbps" is selected, the number of users who can access H.264 images will be limited to
"1". (Only a single user can access H.264 images.)
•
The H.264 bit rate is restricted by "Bandwidth control(bit rate)" on the [Network] tab on the "Network"
page (®page 141). For this reason, the bit rate may be lower than the value when any value with an
asterisk (*) on the right is selected.
[Image quality]
Select the image quality of H.264 images from the following.
Low(Motion priority)/ Normal/ Fine(Image quality priority)
80 Operating Instructions