Top View
10
1
4
3
Figure 2
1. Discharge chute
2. Spring
3. Cotter pin, 3/4 in.
4. Washer, 1/2 in.
5. Rubber bushing
6. Plastic washer
Important
Discharge chute must be spring loaded in
the down position. Lift chute up to test that it snaps to the
full down position.
Attaching the Adjustable Link
1. Place adjustable link trunnion into rear wheel shaft
bracket and secure with hairpin cotter and washer
(Fig. 3).
2
9
8
2
5
6
7
1
m–5651
7. Jam nut, 3/8 in.
8. Straight end of spring
9. Small hole in discharge
chute
10. Wheel
2
3
1
Figure 3
1. Adjustable link trunnion
2. Hairpin cotter
Installing the Mower
1. Park the machine on a level surface, disengage the
power take off (PTO), set the parking brake, and turn
the ignition key to off. Remove the key.
2. Turn the front wheels fully to the left and raise
attachment lift lever all the way to the latched position;
refer to tractor Operator's Manual.
3. Open front and mid-mount hitches by pushing release
button and moving lock handles forward (Fig. 4).
1
4
Figure 4
1. Front hitch
2. Mid-mount hitch
7
m–5618
3. Washer
2
3
3
m–2312
3. Release button
4. Lock handle
4