Toshiba MMY-MAP0806FT8P-TR Service Manual page 305

5. . Top plate
1 Detachment
1) Take off the fixing screws (φ4 x 8, 6 pcs)
2) Remove the top plate.
2 Attachment
1) Fix the Top plate as before.
Fit the non-thermal insulation material side to the E-Box side.
2) Fit the screws. (φ4 x 8, 6 pcs.)
6. . Coil of 2WAY-VALVE (SVS, SVSS, SVDD, SVD)
1 Detachment
1) Perform work of procedure 1. -1) (Electric parts cover) and 5. -1) (top plate).
2) Cut the binding band (1 pc) for bundling the wires of the coil (SVS, SVSS, SVDD, SVD).
Binding band
3) Take off the fixing screws, remove the Coil connection plate and then remove the coil.
Fixing screw size
SVS, SVSS, SVDD : M4 x 6 (4 pcs)
SVD : M4 x 8 (1 pc)
4) Remove the wires from the terminal (TB01,TB02) and the P.C.board (CN710).
Coil connection plate
Position of the screw holes
(Top plate)
Non-heat
insulation
Heat sink (SVSS,SVD)
Screws (M4x6,4pcs)
The inside of
Screw (M4 x 8,1pc)
− 304 −
E-BOX