Emergency Release; Transport, Storage And; Dispose Of; Dismantling The Device - Bosch WGG2440R10 Instructions For Use And Assembly

Table of Contents

Advertisement

17.1 Emergency release

unlock door
Precondition:The drain pump is
empty. → page 37
1. ATTENTION!Escaping water can
cause damage to property.
Do not open the door if there is
water on the glass.
Pull the emergency release down
with a tool and release.
aThe door lock is unlocked.
Insert the maintenance flap and snap it
2.
into place.
Close the maintenance flap.
3.
18 transport,
storage and disposal
18.1 Disassemble the device
A notice:Further information can be
found in the digital user manual by
scanning the QR code in the table of
contents or at www.bosch-home.com.
The faucet s
1.
the water inlet
2.
Turn off the device
3.
close
empty hose.
ten.
Transport, storage and disposalen
Unplug the device from the mains.
4.
Drain the suds.
5.
"Cleaning the drain pump",
page 37
Disconnect the hoses.
6.
18.2 Insert transport locks
Secure the device for transport with
the transport locks to avoid damage.
Remove the 4 cover caps with a
1.
screwdriver.
Save the top caps.
Install the 4 transport locks. Use the
2.
description as a guide
→ "Remove transport locks",
page 14 and proceed in reverse
order.
18.3 Put the device into
operation again
For more information see
→ "Setting up and connecting",
page 13 and
→ "Start empty wash", page
20 .
51

Advertisement

Table of Contents
loading

Table of Contents