enchild lock
A notice:If you want to add
laundry, follow the instructions on
the display.
→ "display", page 23
Open the door.
2.
Add or remove the laundry.
3.
Close the door.
4.
onStart/Reloadto press.
5.
13.11 Cancel program
onStart/Reloadto press.
1.
Open the appliance door.
2.
When the temperature and water
level are high, the door will remain
locked for safety reasons.
– If the temperature is high, start
the programWash.
– If the water level is high, start the
programSling or select a suitable
pumping program.
→ "programs", page 26
Remove the laundry.
3.
→ "Remove laundry", page 34
13.12 Remove laundry
Open the door.
1.
Take the laundry out of the drum.
2.
13.13 Switch off the device
Open the program selectorOut of
1.
place.
34
Wipe the rubber boot dry and
2.
remove foreign objects.
Leave the appliance door and the
3.
detergent drawer open so that any
residual water can dry off.
14 Child Lock
Secure your device against
accidental use of the controls.
14.1 Activating child safety
On both keys 3 secpress for
▶
about 3 seconds.
aThe display shows
aThe controls are locked. aThe child
safety remains
active after switching off the device and in
the event of a power failure.
14.2 Disable child lock
Precondition:To deactivate the child
lock, the device must be switched on.
On both keys 3 secpress for
▶
about 3 seconds.
adisappears from the display
.
.