Quantum SuperLoader 3 User Manual page 141

The SuperLoader LTO and the SuperLoader DLT with an SDLT 600 drive
have the ability to keep track of time when powered off. All other
SuperLoaders must be reset after each power up. The time can be reset
automatically if a time server is configured (see
Otherwise, the time can be set manually from the front panel or through
the On-board Remote Manager. The time zone setting is not lost when
powered off.
With the SuperLoader LTO and the SuperLoader DLT with an
Note:
SDLT 600 drive, the system automatically adjusts for daylight
savings time based on the time zone setting. For other
SuperLoaders, whether you connect the SuperLoader to a time
server or not, if you want to include time changes for daylight
savings time, you must change the time zone manually.
To Set the System Time
(for SuperLoader LTO and SuperLoader DLT with SDLT 600 drive):
1 On any On-board Remote Management page, click
from the banner.
2 Using the drop-down list next to
time zone. This setting is used to manage daylight savings time
changes.
3 From the drop-down list, select the current month.
Month
4 In the field, type the current day.
Day
5 In the field, type the current year.
Year
6 In the textbox, type the current hour, in 24-hour format.
Hour
7 In the textbox, type the current minute.
Minute
8 Click . This concludes the procedure for SuperLoaders other
submit
than the SuperLoader LTO and SuperLoader DLT with an SDLT 600
drive.
SuperLoader User's Guide
Chapter 4 SuperLoader Operation
Configurations Page
Set Networking
Configurations
, select the appropriate
Time Zone
Options).
4
115