Quantum SuperLoader 3 User Manual page 107

To Eject a Cartridge by Bar Code:
1 On the main menu, scroll to
2 On the Commands submenu, scroll to
3 On the Eject submenu, scroll to
4 Scroll to
By Barcode
5 Scroll to the label that corresponds to the cartridge you want to eject.
Press . An hourglass appears on the LCD as the cartridge you
Enter
want is ejected from the mailslot. Wait until the hourglass disappears
from the LCD before pulling out the cartridge.
To Eject a Cartridge by Location:
1 On the main menu, scroll to
2 On the Commands submenu, scroll to
3 On the Eject submenu, scroll to
4 Scroll to
By Location
that are occupied by a data cartridge are indicated by an asterisk (
The slot that is occupied by a cleaning tape is indicated with an
ampersand ( ), if AutoClean is enabled. Scroll to the slot containing
@
the cartridge you want to eject.
5 Press . An hourglass appears on the LCD as the cartridge you
Enter
want is ejected from the mailslot. Wait until the hourglass disappears
from the LCD before pulling out the cartridge.
To Eject a Cartridge from the Tape Drive:
1 On the main menu, scroll to
2 On the Commands submenu, scroll to
3 On the Eject submenu, scroll to
4 Scroll to
From Drive
LCD as the cartridge you want is ejected from the mailslot. Wait until
the hourglass disappears from the LCD before pulling out the
cartridge.
SuperLoader User's Guide
Chapter 4 SuperLoader Operation
, then press
Commands
Eject
, then press
Cartridge
. A bar code label appears.
, then press
Commands
Eject
, then press
Cartridge
. A map of all the magazine slots appears. Slots
, then press
Command
Eject
, then press
Cartridge
, then press . An hourglass appears on the
Enter
Front Panel Functionality
.
Enter
, then press .
Enter
.
Enter
.
Enter
, then press .
Enter
.
Enter
.
Enter
, then press .
Enter
.
Enter
4
4
).
*
4
81