Viewing Status Information; Autoloader Status; Table 3 Autoloader Status - Quantum SuperLoader 3A Series User Manual

Viewing Status Information

Autoloader Status

Table 3 Autoloader Status

Status
Magazines
SCSI ID
Mode
BC Reader
Quantum SuperLoader 3A Series User's Guide
From the scrolling menu on the LCD, you can view the autoloader status,
firmware version, element status, tape drive status, tape drive version,
and Ethernet information.
The autoloader status provides information about: whether a magazine is
2
installed or not, Ethernet connection status, and whether a bar code
reader is installed or not.
To view the autoloader status:
1 From the main menu, scroll to
2 From the
3 From the
A list of messages similar to the following displays:
Message
L*
R*
not used
Random
Sequential
Yes or No
submenu, scroll to
Status
submenu, scroll to
Autoloader
Description
The left magazine is present.
The right magazine is present.
Not used in the 3A Series autoloader.
The change mode is set to Random.
Not used in the 3A Series autoloader.
A bar code reader is present.
Chapter 2 Operating the Autoloader
Viewing Status Information
, and then press
Status
, and then press
Autoloader
, and then press
Status
.
Enter
.
Enter
.
Enter
26