Viewing System Information
Scalar i500 User's Guide
From the operator panel, the
information about the library:
• Library name
• State
• Serial number
• System firmware version number
• Date and time of last firmware update
• Current date and time
From the operator panel
screens for detailed information about:
• the network (IP addresses)
• tape drives
• partitions
The paths to open the appropriate screens are as follows:
• From the web client, select
• From the operator panel, select
The
System Information
library settings:
•
— current date, time, and time zone settings
Date and time
•
— host name, Internet Protocol (IP) address(es), serial
Physical library
number, firmware version, board support package (BSP) level, and
the date the BSP was last updated.
•
Library Partitions
encryption method, number of slots, number of media, and number
of tape drives.
screen provides the following
About
screen, you can also navigate to other
About
Reports > About > Scalar i500
Tools > About Library
report contains information on the following
— name, serial number, control path, status,
Chapter 5 Getting Information
Viewing System Information
.
.
148