Electrical Connection - Asko DC7784HP.S.UK User Manual

ELECTRICAL CONNECTION

The drying cabinet must be connected to a
230 V single-phase 50 Hz and protectively
earthed wall socket.
The drying cabinet is supplied ready for
connection with a cable and an earthed plug.
____________________________________
The drying cabinet should be connected to
an earthed wall socket using the connecting
cable supplied and must not be permanently
wired.
____________________________________
____________________________________
The socket should be located so that the
plug can be easily pulled out if necessary.
____________________________________
____________________________________
Check that the connection current agrees
with the data on the identifi cation plate and
that the power cord is earthed correctly in
accordance with applicable standard. We
recommend that the power cord be fi tted with
a residual current device (RCD).
____________________________________
____________________________________
The drying cabinet should be connected to a
dedicated circuit.
____________________________________
____________________________________
The manufacturer cannot be held liable if the
electrical connections are not carried out as
prescribed in this manual.
____________________________________
21