Table of Contents
Advertisement
3. Recording Modes
Taking pictures with customised colour, defocus control, and
brightness settings
Recording Mode:
Setting colour
∫
1
Press 1 to display the setting screen.
2
Rotate the rear dial to adjust colour.
• Press [MENU/SET] to return to the recording screen.
• The colour setting will return to the default level (centre
point) when this unit is turned off or the camera is switched
to another Recording Mode.
∫
Taking a picture with a blurred background (Defocus Control)
1
Press [Fn6] to display the setting screen.
2
Set the blurriness by rotating the rear dial.
• If you press [MENU/SET], you can return to the recording
screen.
• Pressing [Fn6] on the blurriness setting screen will cancel
the setting.
• Auto Focus Mode is set to [Ø].
The position of the AF area can be set by touching the
screen. (Its size cannot be changed)
Setting brightness
∫
1
Press [
].
2
Rotate the rear dial to adjust brightness.
• You can adjust the Exposure Bracket setting by pressing
3/4 while the brightness setting screen is displayed.
(P140)
• Press [
] again to return to the recording screen.
Change the settings by using the touch screen
1 Touch [
].
2 Touch the item you want to set.
[
]: Colour tone
[
]: Defocus level
[
]: Brightness
3 Drag the slide bar or
• Press [MENU/SET] to return to the recording screen.
to set.
exposure meter
65
A A
B B B
SS
SS
SS
250
125
60
30
15
F
F
2.8
4.0
5.6
OFF
OFF
+1
+1
- 5 - 5 - 4 - 4 - 3 - 3 - 2 - 2 - 1 - 1 0 0
+1 +1 +2 +2 +3 +3 +4 +4 +5 +5
Advertisement
Table of Contents
