Table of Contents
Advertisement
2. Getting Started/Basic Operations
Cursor buttons/[MENU/SET] button
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
• These operating instructions expresses the up, down, left, and
right of the cursor button as 3/4/2/1.
• By assigning [Cursor Button Lock] to a function button, you can disable the cursor buttons and
the [MENU/SET] button.
[DISP.] button (Switching the displayed information)
Press [DISP.] to switch the information displayed on the
screen.
• If the information on the screen is not displayed any longer
because no operation was performed for some time, press the
[DISP.] button or touch the screen to display the information
again.
In Recording Mode
Switching the display method of the viewfinder/monitor
>
[Custom] > [LVF Disp.Style]
MENU
>
[Custom] > [Monitor Disp. Style]
MENU
[
] (viewfinder style):
[
] (monitor style):
(P55)
Scales down images slightly so that you can better review
the composition of the images.
Scales images to fill the entire screen so that you can see
their details.
45
Advertisement
Table of Contents
