Table of Contents
Advertisement
9. Using Menu Functions
>
[Setup]
MENU
[Economy]
[USB Mode]
[Sleep Mode]:
The camera is automatically turned off if the camera has
not been used for the time selected on the setting.
[Sleep Mode(Wi-Fi)]:
The camera is automatically turned off if it is not connected
to a Wi-Fi network and has not been used for 15 minutes
(approx.).
[Auto LVF/Monitor Off]:
The monitor/viewfinder is automatically turned off if the
camera has not been used for the time selected on the
setting.
• To cancel [Sleep Mode]or [Sleep Mode(Wi-Fi)], press the
shutter button halfway or turn the camera off and on.
• To turn the monitor/viewfinder on again, press any button
or touch the monitor.
• [Economy] does not work in the following cases.
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
– When recording with [
Photo function
– When using [Multi Exp.]
– When using [Time Lapse Shot]
– When using [Stop Motion Animation] (only when [Auto
Shooting] is set)
– When using the HDMI output during recording
• When using the AC adaptor (optional), [Sleep Mode] and
[Sleep Mode(Wi-Fi)] are disabled.
• When using the AC adaptor (optional), [Auto LVF/Monitor
Off] is fixed to [5MIN.].
Sets the communication method when connecting using
the USB connection cable (supplied).
y [Select on connection]:
Select this setting to select the USB communication
system when connecting to another device.
{ [PictBridge(PTP)]:
Select this setting when connecting to a printer supporting
PictBridge.
z [PC]:
Select this setting to export images to a connected PC.
232
] ([4K Pre-Burst]) of the 4K
s
s
Advertisement
Table of Contents
